First, the appearance of:

1, the installation location, product design should be carried out according to the bathroom design drawings;

2, visual should be under natural light, the distance range of 600mm visual inspection of glass products, metal parts, aluminum surface with no obvious scratches, scratch, there shall be no crack and indentation damage;

3, uniform, smooth, no glue leakage.

4, the screw is not exposed, covered with decorative cover.

5, handle, pull loose.

6, open the door of shower room movable door and the fixed glass Kamiguchi Hisai,rubber and glass, and flush.

7, touch the components of all, not injury risk.

8, with inner six angle and a screwdriver checks all the binding sites are combined firmly, to tighten all fastening screws.

9, control installation instructions view all components are installed.

Product width and height, measured 10 installed are consistent with our.

Two, the structure of the assembly requirements:

1, the installation dimensions: the precision of steel tape + 0.6mm were measured to test the following 3 content is in line with the installation size tolerance requirements:shower room, track spacing parallel uniform height: 1mm; shower room glass frame,horizontal and vertical combination shall ensure that;

2, the shower room frame welds should be less than or equal to 0.5mm; the degree ofdeviation should be less than or equal to 2.0mm.

Three, function:

1, the door opened and closed smoothly, magnetic attraction force uniform opening and closing door card hysteresis, opening and closing force shall not be less than 15N, the magnetic suction opening force of not more than 50N.

2, open the door limit size should be larger than 460mm (in space).

A minimum distance of 3, the handle and the fixing edge should be greater than 25mm;there is no risk of injury of hand.

4, to test the water for shower is Water Leakage phenomenon.